Re: Yay, 3.6ghz !!!!1!!!1
3.5ghz may be enough... but is the most you can get? That's why I like overclocking, you can always go further and faster.
What is the VID of your Q6600 (Use Coretemp to tell you)
Fanny about with these settings where applicable:
CPU Ratio: 9
FSB: 400mhz
PCIE frq: 100
FSB Strap to NB: 333mhz
DRAM Frq: 961mhz (P5Q won't boot with memory under 800mhz)
DRAM timing: 5-5-5-15 (other settings auto)
DRAM Static Read Control: Enabled
DRAM Read Training: Enabled
MEM OC Charger: Disabled
AI Transaction Booster: Manual
Common Performance Level: 08 (All pull-in's disabled)
CPU Vcore: 1.4125v
CPU GTL Voltage Reference (0/2): 0.630
CPU GTL Voltage Reference (1/3): 0.670
CPU PLL Voltage: 1.56
FSB Termination Voltage: 1.28
DRAM Voltage: 2.1
NB Voltage: 1.3
NB GTL Voltage: 0.630
SB Voltage: 1.3
PCIE SATA Voltage: 1.5
Loadline Calibration: Enabled
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
CPU Clock Skew: Normal
C1E Support: Disabled
Max CPUID Value Limit: Disabled
All others enabled.
3.5ghz may be enough... but is the most you can get? That's why I like overclocking, you can always go further and faster.
What is the VID of your Q6600 (Use Coretemp to tell you)
Fanny about with these settings where applicable:
CPU Ratio: 9
FSB: 400mhz
PCIE frq: 100
FSB Strap to NB: 333mhz
DRAM Frq: 961mhz (P5Q won't boot with memory under 800mhz)
DRAM timing: 5-5-5-15 (other settings auto)
DRAM Static Read Control: Enabled
DRAM Read Training: Enabled
MEM OC Charger: Disabled
AI Transaction Booster: Manual
Common Performance Level: 08 (All pull-in's disabled)
CPU Vcore: 1.4125v
CPU GTL Voltage Reference (0/2): 0.630
CPU GTL Voltage Reference (1/3): 0.670
CPU PLL Voltage: 1.56
FSB Termination Voltage: 1.28
DRAM Voltage: 2.1
NB Voltage: 1.3
NB GTL Voltage: 0.630
SB Voltage: 1.3
PCIE SATA Voltage: 1.5
Loadline Calibration: Enabled
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
CPU Clock Skew: Normal
C1E Support: Disabled
Max CPUID Value Limit: Disabled
All others enabled.
Comment