Dust off your rig.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • =98=
    Member
    • Oct 2006
    • 10299

    #16

    Comment

    • Xodus
      Member
      • Apr 2006
      • 846

      #17
      Holy ****

      Comment

      • looqas

        #18
        alex: Mine looked more or less the same

        Comment

        • Bisley_Bob
          Senior Member
          • Apr 2007
          • 391

          #19
          Ha ha, nice one Alex!

          I love my P180, the dust filters mean i have to clean out the inside so infrequently.

          Comment

          • =98=
            Member
            • Oct 2006
            • 10299

            #20
            Well, i really want a P190 except for the bloody PSU's. Might look into the Silverstone TJ07's and T109's.

            In fact, knowing i have some monies coming in, i will start a new thread.

            And, when was the last time you cleaned your Typhoon Rob? Might surprise you

            Comment

            • Bisley_Bob
              Senior Member
              • Apr 2007
              • 391

              #21
              Not long ago actually! It wasn't nearly as bad as yours!

              Comment

              • megawhompertoo
                oldswab
                • Dec 2005
                • 2124

                #22
                Originally posted by looqas
                Just a friendly advice for those who think dusting is not such a big deal.

                I was having blue screens lately when playing. I ran orthos and it resulted the same eventually when the temps hit 80C on CPU. The idle temps were somewhere around 45-52C. :dead:

                I have OCed the E6750 to 3,2GHz with 1,375V.

                The 8800GTS GPU idle temps @ 620/2000 were at 67C at full fan blow :shakehead

                I openened the case and in two months the heatsinks were buried with very thick layer of dust. It seems that my room is more dustier than the previous room where the comp was in.

                Anyway. After some serious dusting the idle temps went to 25C and under load 45-47C on CPU. The GPU idles at 60C @ 70% fan and in use 67C at 100% fan cycle.

                Those are pretty big drops we are talking about here.
                37C is body temp. the idea that your electronics are working at an efficiency approaching 4B years of biology leads me to wonder:

                a) are you living in a polar climate, which would explaing the nominal temps

                b) is your thermo sensor out of whack.

                either answer, or any other could explain the result, but getting a *cold* temp relative to room temp usually requires some inventive cooling, unless you're wrapped in a blanket to begin with.

                Comment

                • looqas

                  #23
                  Originally posted by megawhompertoo View Post
                  37C is body temp. the idea that your electronics are working at an efficiency approaching 4B years of biology leads me to wonder:

                  a) are you living in a polar climate, which would explaing the nominal temps

                  b) is your thermo sensor out of whack.

                  either answer, or any other could explain the result, but getting a *cold* temp relative to room temp usually requires some inventive cooling, unless you're wrapped in a blanket to begin with.

                  Tends to be a bit chilly here in Finland. Room temp is 20-22C. I've taken care of ventilation with case fans so the temps are for real.

                  Besides you lost me with human temps at 37C idea. I'm not exactly hugging the CPU.

                  Comment

                  • camper.
                    Member
                    • Dec 2006
                    • 3459

                    #24
                    Originally posted by megawhompertoo View Post
                    37C is body temp. the idea that your electronics are working at an efficiency approaching 4B years of biology leads me to wonder:

                    a) are you living in a polar climate, which would explaing the nominal temps

                    b) is your thermo sensor out of whack.

                    either answer, or any other could explain the result, but getting a *cold* temp relative to room temp usually requires some inventive cooling, unless you're wrapped in a blanket to begin with.

                    Nope, I've seen a fair number of C2Ds hovering around 10-20*C even with a high room temperature. It's the "leave it for a while and it freezes your bollocks off effect", touch any old metal object after leaving it for a while.

                    Comment

                    Working...