All high on 1280x1024 mode?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • imported_Wreck

    #16
    Re: All high on 1280x1024 mode?

    Originally posted by Romme1
    So, Is 6800GT enough to handle all high at 1024x768?
    Depends on what you put on high. I would turn dynamic shadows off cuz they suck. BF2 decided to put lego shadows in the game. Then I'd put dynamic lighting on low/medium. The rest you should be able to turn up to high @ 1024x768.

    There is a new card from Nvidia the 6800 GS at around $200 that is equal with a 6800 GT in BF2.


    Comment

    • Eddy01741

      #17
      Re: All high on 1280x1024 mode?

      The processor you have there, the 2800+ is fine, think about upgrading the vid card. I play all high with 6xaa and 16xaf with my setup below. It runs at a average 60fps, and if i'm running arround looking at the ground (it actually is very complicated when you're running, as it requires extreme detail as it is very close to where you are lookking at) i get like 30-35fps. Proccessors don't bottleneck very much in BF2, maybe they will in FEAR though.

      EDIT: It's only never above 60 fps because it's like capped there. If it wasn't, i'd be getting like 65 fps, not much, but it is a difference. ALl my games are capped at 60fps, i'm not sure whats wrong, but i don't care, 60 fps is when the naked eye can't see any frames at all, and that's with a REALLY good eye. I can't see the difference between lets say 35-45 fps.

      Comment

      • Sir. MatDef
        Member
        • Sep 2005
        • 2899

        #18
        Re: All high on 1280x1024 mode?

        Originally posted by Eddy01741
        EDIT: It's only never above 60 fps because it's like capped there. If it wasn't, i'd be getting like 65 fps, not much, but it is a difference. ALl my games are capped at 60fps, i'm not sure whats wrong, but i don't care, 60 fps is when the naked eye can't see any frames at all, and that's with a REALLY good eye. I can't see the difference between lets say 35-45 fps.
        Maybe you have vsync enabled?

        Comment

        • Umi.Ryuuzaki

          #19
          Re: All high on 1280x1024 mode?

          people are forgetting about the ram...this game is a ram hog and to run high, 1.5-2.0gb of ram is also needed to do it...without studdering.

          Comment

          • BRUTALITEEEEEEEEE

            #20
            Re: All high on 1280x1024 mode?

            since BF2 is NOT CPU sensitive AT ALL, I would say with a 6600GT you could do 1024x768 on high but, textures on medium (unless you have 2 gigs) just fine. This game is all about your GPU and RAM. 6800GT and 2 gigs you could be screamin. Go to tweakguides.com ands check out their BF2 tweak guide because it has screenshots of how all the different settings differ.

            Comment

            • Eddy01741

              #21
              Re: All high on 1280x1024 mode?

              Originally posted by BRUTALITEEEEEEEEEEEE
              since BF2 is NOT CPU sensitive AT ALL, I would say with a 6600GT you could do 1024x768 on high but, textures on medium (unless you have 2 gigs) just fine. This game is all about your GPU and RAM. 6800GT and 2 gigs you could be screamin. Go to tweakguides.com ands check out their BF2 tweak guide because it has screenshots of how all the different settings differ.
              Correction, if you put it to the highest setting possible with your current system it will make like onlly 1fps difference. If you go for pure speed (no aa, 800x600, all low, no af etc.) it will make a difference, that is if you disable the 90fps cap on the game. SIr.MatDef, how do i disable vsync?

              Comment

              • Sir. MatDef
                Member
                • Sep 2005
                • 2899

                #22
                Re: All high on 1280x1024 mode?

                Originally posted by Eddy01741
                Correction, if you put it to the highest setting possible with your current system it will make like onlly 1fps difference. If you go for pure speed (no aa, 800x600, all low, no af etc.) it will make a difference, that is if you disable the 90fps cap on the game. SIr.MatDef, how do i disable vsync?
                Not quite sure, it should either be an option in bf2, or your ati control panel.

                Comment

                • Flanker

                  #23
                  Re: All high on 1280x1024 mode?

                  Originally posted by BRUTALITEEEEEEEEEEEE
                  BF2 is NOT CPU sensitive AT ALL.
                  My God...ok, this is a direct quote from Xbit Labs ok?


                  Originally posted by Xbit Labs Article
                  Battlefield 2 shooter, a continuation of one of the most PC popular military strategies played on the Net today, cannot be considered a new-generation game. It was released in summer and doesn’t really demand too much for the graphics subsystem. Nevertheless, we decided to include it into our today’s testing session for multiple reasons. Its incredible popularity is actually one of them. Another important reason the determined our decision in favor of this game is the fact that unlike many other shooters it sets pretty high requirements to the system processor, rather than graphics accelerator.

                  For example, if we look at the graphics card reviews on our site, we will notice that in low resolutions the graphics cards perform more or less equally in Battlefield 2, even if anisotropic filtering and full-screen anti-aliasing are enabled.

                  Comment

                  • chakhaeboy

                    #24
                    Re: All high on 1280x1024 mode?

                    Originally posted by Romme1
                    What about 6600GT at 1024x768? Can i run on all high or ultra high?
                    Dude, You ain't gonna see much difference playing 1280x1024 from 1024x768. Its just a resolution and monitor makes it all the difference. I have a 17 FTP monitor and i think i run at 1152x864 with all high and AA 6x just because its a lot smoother and flawless than playing at 1280x1024. I could play 1280x1024 maxed out with my settings, but it won't be smooth as 1152x864. That decision was totally depended on Graphic Quality. They were the same. That's why i went lower with my resolution.

                    I hope this helps!

                    Comment

                    • BRUTALITEEEEEEEEE

                      #25
                      Re: All high on 1280x1024 mode?

                      Originally posted by Flanker
                      My God...ok, this is a direct quote from Xbit Labs ok?
                      My God!! I broke the most impiortant rule of "Forum Conduct"

                      Rule #1: Never have an opinion or speak from personal expierience

                      but, but, but...Im getting confused:

                      From tweakguides.com

                      Battlefield 2's performance (particularly when online) is highly dependent on your graphics card and video settings, much more so than your CPU speed. Pay particular attention to the descriptions below if you want a good balance of performance and image quality, and of course if you run a graphics card which is old, slow or unsupported by BF2, keep this in mind if your performance is still poor at any setting.

                      I DON'T KNOW WHO TO BELIEVE

                      Im sure it could be CPU intensive so let me rephrase my statement....

                      "BF2 is.......a game, load it up and play it. If it doesn't run as good as YOU want it to then either delete it or suck it up and get some bada** hardware to get the job done"

                      Flanker: Im completly messing around so don't take any offense :)

                      Comment

                      Working...