RAM issue..

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Nitemare

    #1

    RAM issue..

    DDR 400 means that it runs @ 400mhz right? Well mine is only running at 166, I have 2x 512's and 1GB, but when I take the 1GB out, the 2 matching 512's still only go to 200 mhz. How do I get them 400?
  • Talus
    Member
    • Oct 2006
    • 6854

    #2
    Re: RAM issue..

    It's double data rate (DDR): 200 x 2 = 400

    Comment

    • djstubbs

      #3
      Re: RAM issue..

      Running a 1gb stick, and 2x512 will cause your memory to run at the slower speed.

      It's not ideal.

      Comment

      • DeathGiver

        #4
        Re: RAM issue..

        Any problems with mixing ram? I have 1 gig of 512 both 400 MHZ . But my bios says pc 2700 when their 3200.



        Field Value
        DRAM Slot #1 512 MB (PC3200 DDR SDRAM)
        Field Value
        DRAM Slot #2 512 MB (PC3200 DDR SDRAM)




        Memory Module Properties:
        Module Name Hyundai HYMD264 646B8J-D43
        Serial Number FFFF9538h
        Module Size 512 MB (2 ranks, 4 banks)
        Module Type Unbuffered
        Memory Type DDR SDRAM
        Memory Speed PC3200 (200 MHz)
        Module Width 64 bit
        Module Voltage SSTL 2.5
        Error Detection Method None
        Refresh Rate Reduced (7.8 us), Self-Refresh

        Memory Timings:
        @ 200 MHz 3.0-3-3-8 (CL-RCD-RP-RAS)
        @ 166 MHz 2.5-3-3-7 (CL-RCD-RP-RAS)
        @ 133 MHz 2.0-2-2-6 (CL-RCD-RP-RAS)






        Memory Module Properties:
        Module Name [ EVALUATION ]
        Serial Number 3EF3A402h
        Manufacture Date Week 6 / 2005
        Module Size 512 MB (2 ranks, 4 banks)
        Module Type [ EVALUATION ]
        Memory Type DDR SDRAM
        Memory Speed PC3200 (200 MHz)
        Module Width 64 bit
        Module Voltage SSTL 2.5
        Error Detection Method None
        Refresh Rate Reduced (7.8 us), Self-Refresh

        Memory Timings:
        @ 200 MHz 3.0-3-3-8 (CL-RCD-RP-RAS)
        @ 166 MHz 2.5-3-3-7 (CL-RCD-RP-RAS)

        Comment

        • bisley

          #5
          Re: RAM issue..

          Check your mobos web site for info on supported ram

          Comment

          • Talus
            Member
            • Oct 2006
            • 6854

            #6
            Re: RAM issue..

            My RAM is mixed. I know it's not something you're supposed to do...

            But...when I realized that BF2 was stuttering due to only having 1 GB of RAM (which is PC2700), I didn't want to go out and buy ANOTHER gig of PC2700. So I bought a gig of PC3200. I have 2 512 MB sticks of PC2700 (generic) and 2 512 MB sticks of PC3200 (matched Corsair). I used the divider in my BIOS to run all RAM at 333 Mhz.

            I tested BF2 with 1 GB of PC2700 @ 333, 1 GB of PC3200 @ 400, and 2 GB of mixed @ 333 ...the best results were with the mixed 2 GB. Best framerates and smooth as glass.

            With the v1.03 patch, I'm hoping the 1 GB will be sufficient for good performance and I can take out the 2 512 sticks of PC2700 until I feel it necessary to run a full 2 GB of PC3200 running at 400 MHz.

            Comment

            • lcplsickoll

              #7
              Re: RAM issue..

              You can mix brands, but it's not recommended. You'll getter better performance using identical, matched sticks. It will work most of the time, but not on par with using matched stuff.

              Comment

              • Shamus

                #8
                Re: RAM issue..

                Many if not most motherboards will revert a DDR400 system to DDR333 when you add more than two modules.

                Comment

                • Nitemare

                  #9
                  Re: RAM issue..

                  But even when I take out the 2x512's and just have the 1GB stick it only runs at 200mhz.

                  Comment

                  • Talus
                    Member
                    • Oct 2006
                    • 6854

                    #10
                    Re: RAM issue..

                    But DDR RAM effectively doubles it to 400 Mhz by sending and receiving twice per clock cycle.

                    DDR PC2700 runs at 166 Mhz (x 2)
                    DDR PC3200 runs at 200 Mhz (x 2)

                    Comment

                    • NoSoup4You

                      #11
                      Re: RAM issue..

                      You 1GB and 2x512 are causing the motherboard confusion. You maybe able to manually set the RAM clock in the bios. Simply bump it from 166 to 200. So long as you are within the manufactures recommened operating range, even if you have to unlock it, the RAM should be covered.

                      Comment

                      Working...