Over clocking

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • VonBarter

    #1

    Over clocking

    Does anyone one have both of these products? How do I over clock them? what setting work for you?
    ASUS P5QL-E LGA 775 Intel P43 ATX Intel Motherboard
    Intel Core 2 Quad Q6600 Kentsfield 2.4GHz LGA 775 Quad-Core

    Thanks your all sexy....:p
  • AvalancheDiode
    Need more squeezing
    • Jan 2007
    • 988

    #2
    Re: Over clocking

    Originally posted by VonBarter
    Does anyone one have both of these products? How do I over clock them? what setting work for you?
    ASUS P5QL-E LGA 775 Intel P43 ATX Intel Motherboard
    Intel Core 2 Quad Q6600 Kentsfield 2.4GHz LGA 775 Quad-Core

    Thanks your all sexy....:p
    First of all, you need good CPU cooling. Stock usually doesn't work well for quads, though dual cores may work great on stock. For Intel system, all you need to do is raise FSB clock and adjust FSB:RAM frequency ratio to keep RAM speed under normal range. I believe Alex already wrote a comprehensible guide on this board. Check that out first. If it doesn't get to 3.2GHz with slight voltage bump (0.05V), then something must be wrong.

    Comment

    • =98=
      Member
      • Oct 2006
      • 10299

      #3
      Re: Over clocking

      I haven't written a guide yet. I am waiting until my new Q6600 G0 arrives today before I write one.

      Comment

      • Busby, Paul (Bicci)

        #4
        Re: Over clocking

        Clunk has an excellent guide on his forums and on hexus



        As for cooler http://www.newegg.com/Product/Produc...82E16835233014 this is the kind of thing avalanche means.

        I have the thermalright ultima 90 which is excellent (if not a bit fiddly to install) but i have heard very good things above the one posted above.

        Comment

        • =98=
          Member
          • Oct 2006
          • 10299

          #5
          Re: Over clocking

          Originally posted by [11]O|Maj.B1scu1T[FM]
          As for cooler http://www.newegg.com/Product/Produc...82E16835233014 this is the kind of thing avalanche means.
          The Xigmatek is good, i have one. However, stick with the slightly older revision, the HDT-S1283 (not the S1284). It's noted for being slightly better in tests, but not hugely so.

          Comment

          • VonBarter

            #6
            Re: Over clocking

            Originally posted by Alex98uk
            The Xigmatek is good, i have one. However, stick with the slightly older revision, the HDT-S1283 (not the S1284). It's noted for being slightly better in tests, but not hugely so.
            iT DOESN'T HAVE A FAN ? iT OK?

            Comment

            • Wizrdwarts
              Member
              • Dec 2006
              • 3754

              #7
              Re: Over clocking

              It does, it's just not attached in the pictures.

              Comment

              • Busby, Paul (Bicci)

                #8
                Re: Over clocking

                Originally posted by Alex98uk
                The Xigmatek is good, i have one. However, stick with the slightly older revision, the HDT-S1283 (not the S1284). It's noted for being slightly better in tests, but not hugely so.
                The one i put there is not the S1284 its the SD964 because its 92mm rather than 120. I figured the 120 might be a little tight inside an elite case.

                Comment

                Working...