A few days ago I installed another GB of RAM along with a new graphics card (GeForce 6800 GS to replace my GeForce FX 5900, great card), I also reinstalled Battlefield 2 and this time I installed in on one of my S-ATA drives.
The problem I have is that all loading times have actually increased! Verifying client data have nearly doubled in time, I have no idea why this is happening. Just about everyone who have had upgraded to 2 GB of RAM the loading time has descreased.
Total loading time: 2 minutes 18 seconds
Verifying Client Data: 1 minute 5 seconds (earlier it was 27 seconds)
The system specs are as follows:
P4 2.6GHz, 800 MHz FSB
2x 512 MB Samsung DDR-400 3.0-3-3-8 @ 200 MHz, running at 2.5-3-3-7 @ 160 MHz
2x 512 MB Corsair Value DDR-400 2.5-3-3-8 @ 200 MHz, running at 2.5-3-3-7 @ 160 MHz
XFX GeForce 6800 GS 256 MB AGP @ 325/1000
160 GB Seagate S-ATA -> Battlefield 2 install, Paging file 1 GB.
180 GB IBM/Hitachi IDE -> System
Asus P4C8000-E Deluxe
Settings used: All High except, Dynamic shadow & light set to low and off. FSAA is disabled. Viewdistance at 100%.
I've forwarded all ports, updated punkbuster before starting BF2, tweaked AGP aperture setting, defragged both used drives.
Anyone know what I can do to decrease the loading time?
The problem I have is that all loading times have actually increased! Verifying client data have nearly doubled in time, I have no idea why this is happening. Just about everyone who have had upgraded to 2 GB of RAM the loading time has descreased.
Total loading time: 2 minutes 18 seconds
Verifying Client Data: 1 minute 5 seconds (earlier it was 27 seconds)
The system specs are as follows:
P4 2.6GHz, 800 MHz FSB
2x 512 MB Samsung DDR-400 3.0-3-3-8 @ 200 MHz, running at 2.5-3-3-7 @ 160 MHz
2x 512 MB Corsair Value DDR-400 2.5-3-3-8 @ 200 MHz, running at 2.5-3-3-7 @ 160 MHz
XFX GeForce 6800 GS 256 MB AGP @ 325/1000
160 GB Seagate S-ATA -> Battlefield 2 install, Paging file 1 GB.
180 GB IBM/Hitachi IDE -> System
Asus P4C8000-E Deluxe
Settings used: All High except, Dynamic shadow & light set to low and off. FSAA is disabled. Viewdistance at 100%.
I've forwarded all ports, updated punkbuster before starting BF2, tweaked AGP aperture setting, defragged both used drives.
Anyone know what I can do to decrease the loading time?
Comment