64Vista Memory error dll ,, anyone help

[Bald-Eagle11]

Guys

Recently i have built a new rigg;

E6600 Conroe
4x1Gb of OCZ DDR2 Platinu, rev 2
EVGA 680I SLI MOBO
8800GTX

BF2 loads as nornal and plays very well but i would say 2 games out of 10 will crash with a dll memory error , sorry should have got a screenie .

Any thoughts

[camper.]

Re: 64Vista Memory error dll ,, anyone help

Memtest86+


Download an image and "burn" it to a USB Flash drive, reboot and boot from it and see what happens.

[Corkum]

Re: 64Vista Memory error dll ,, anyone help

nice rig. thats about all i have for thoughts right now.

[imported_Ph1L]

Re: 64Vista Memory error dll ,, anyone help

Get a screenshot.

[samarlian]

Re: 64Vista Memory error dll ,, anyone help

I was getting that message for about 4 weeks and then on saturday my motherboard died on me, it would switch on and turn back off again within 2 seconds, just rmaed it through my uk supplier who has also tested the board and agreed that it is dead

I have the same ram, tested all my other components in another rig and all is well. Hope this does not happen to you m8

[imported_Ph1L]

Re: 64Vista Memory error dll ,, anyone help

That would suck @ #5

[Bald-Eagle11]

Re: 64Vista Memory error dll ,, anyone help

OCZ 6400 Dual Channel Platinum Revision 2 XTC Series DDR2 they should be
4-4-4-15 but as i sias everything is on stock settings on my mobo , the ram is set to AUTO

So should I manualy set them thorough the bios to the above settings ??

OCZ 6400 Dual Channel Platinum Revision 2 XTC Series DDR2 they should be
4-4-4-15 but as i sias everything is on stock settings on my mobo , the ram is set to AUTO

So what your saying is manualy set them thorough the bios to the above settings ??

Oh i got a screenie

http://i158.photobucket.com/albums/t95/Baldeagle_2007/dllerror.jpg

[camper.]

Re: 64Vista Memory error dll ,, anyone help

Run it through Memtest86+...

[Bald-Eagle11]

Re: 64Vista Memory error dll ,, anyone help

Run it through Memtest86+...

I cant find a link for 64 Bit Vista Mem test

[samarlian]

Re: 64Vista Memory error dll ,, anyone help

yeap turn auto off m8 i have mine running as expert

[Bald-Eagle11]

Re: 64Vista Memory error dll ,, anyone help

yeap turn auto off m8 i have mine running as expert

Ok i set to 4-4-4-15 and it booted but 10 secs into Vista i got teh BSOD

Im lost ,,anyoone please help.

[samarlian]

Re: 64Vista Memory error dll ,, anyone help

Here is a overclocking guide which tells you how to set your e6600 conroe and memory on that board

I would reset your cmos and follow the guide below

http://uk.pc.ign.com/articles/747/747606p2.html

[kulamonster3]

Re: 64Vista Memory error dll ,, anyone help

1) Do the Memtest (rule out problems with RAM sticks)
2) Turn off Auto
3) Clear CMOS
4) Manually Set Latency in Bios (you should find the guide to your RAM to see what settings you can get away with to avoid the BSOD)
5) Do your RAM sticks have heat sheilds or sinks? If your system is overheating that will cause MEM Crashes too (I found out the hard way....now I have 7 fans in my case...lol)

Good Luck

[Bald-Eagle11]

Re: 64Vista Memory error dll ,, anyone help

Here is a overclocking guide which tells you how to set your e6600 conroe and memory on that board

I would reset your cmos and follow the guide below


http://uk.pc.ign.com/articles/747/747606p2.html

Thx for the replies Samalrlian , i have over clocked frequently to this above recipe and have had it running at 3.2Ghz very easily. With that said i always get a BSOD and revert back to stock settings .

Im not sure what is going on here but my suggestions are 2 fold

1. Vista 64 Bit home premium is just not upto overclocking yet ?
2. I need to fiddle with some MEM timings of which i have no clue what to do at all .

Im seriuosly thiking of a turtle back to XP pro at the mo ?

[imported_Talbot]

Re: 64Vista Memory error dll ,, anyone help

Thx for the replies Samalrlian , i have over clocked frequently to this above recipe and have had it running at 3.2Ghz very easily. With that said i always get a BSOD and revert back to stock settings .

Im not sure what is going on here but my suggestions are 2 fold

1. Vista 64 Bit home premium is just not upto overclocking yet ?
2. I need to fiddle with some MEM timings of which i have no clue what to do at all .

Im seriuosly thiking of a turtle back to XP pro at the mo ?

Getting exactly the same error as you and I have practically the same set-up. New Nvidia drivers out this week, hopefully the problem will get sorted.