Only pure servers after 1.3 patch!

[Angelsoul]

Re: Only pure servers after 1.3 patch!

Ok. Reinstalled the IDE controler file. Did a benchmark test with HD Tach program before and after.

Before I reinstalled the IDE Controler file, the maximum read speed was 3.2 MB/s. After the reinstall it went up to 64.1 MB/s. My verficiation time went from ap. 3 mins to 35 secs after the map was finished loading.

Did a format on my HD and it could be the cause of the low read speed. Its a worth a try to reinstall the IDE controler file. Plus download the program.

[coco]

Re: Only pure servers after 1.3 patch!

You need to find a server running more than 1 round per map.

This way you only load and verify once per map, not per round.

We play 2 rounds, it loads and verifys once then you play 2 rounds, so in affect you only load and verify once about every 45mins - 1 hour.

We also have a 60 second start delay to slow down any hyper loaders from pinching all the armour.

[Kixfox]

Re: Only pure servers after 1.3 patch!

Its down to your ide controllers.

Hi!

I got a SATA harddrive with 1.5GB/s, so that is not the problem.
Thanks anyway.

<about processor>

My processor is 2.1 ghz and an AMD.
And because its an AMD it got lower clockspeeds.

A 2 ghz AMD is clocked to 3 ghz.
And my AMD is the same as 3 ghz too...

Do you understand?

About the RAM, you do not need 2 gig, that is good - but not a requirement.
1.5gb is enough for BF2, and I am awared that my RAM is a bit too low.

But the game is running ABSOLUTLY fine except it takes LOOOONG time to verify...