Refresh Failure.The memory refresh circuitry on the motherboard is faulty.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • DeathFromAbove

    #1

    Refresh Failure.The memory refresh circuitry on the motherboard is faulty.

    Is that A mobo problem or a RAM problem?

    Refresh Failure-The memory refresh circuitry on the motherboard is faulty.
  • lil_jimmy_norton

    #2
    Re: Refresh Failure.The memory refresh circuitry on the motherboard is faulty.

    My guess would be MOBO.

    Comment

    • DeathFromAbove

      #3
      Re: Refresh Failure.The memory refresh circuitry on the motherboard is faulty.

      Originally posted by lil_jimmy_norton
      My guess would be MOBO.
      DOH! anyway to know for sure?'


      1 beep --> Refresh failure.

      WTF?

      Comment

      • NoSoup4You

        #4
        Re: Refresh Failure.The memory refresh circuitry on the motherboard is faulty.

        Code out the error and look it up in your mobo manual. Try the RAM in another system, or run memtest86 on it. Chances are its the mobo.

        Comment

        • Vw-Merv-CL

          #5
          Re: Refresh Failure.The memory refresh circuitry on the motherboard is faulty.

          Originally posted by AviationOrdnance
          DOH! anyway to know for sure?'


          1 beep --> Refresh failure.

          WTF?
          my mobo one beep is normal, like king sais check the back of your mobo manual for a list of beeps and meanings, Hail Abits POST error display

          Comment

          • Berrern
            Member
            • Jul 2005
            • 585

            #6
            Re: Refresh Failure.The memory refresh circuitry on the motherboard is faulty.

            Does this prevent you from getting past the BIOS POST?
            If no, then go to your memory manufacturers homepage, download a memory diagnostic utility. Create a boot disk as instructed and let the program test your RAM. If no faults are reported, it's definitely the motherboard.

            If you can't get past the BIOS POST, then take out your RAM modules, and boot your PC with only one of them installed (assuming you have more than one).

            Comment

            Working...