Advice

[Mikeyzig]

Ok, I have found out that my Dell Pc is probably a non standard m/b and power supply etc.

I am planning to buy a new m/b and case and psu and then build my own system using the parts I already have.

Any advice on what kind of m/b , case and psu I should get.

Thanks.

[Vw-Merv-CL]

Re: Advice

have a look at some reviews of boards that matches the same socket number as your CPU (what socket is that btw 775?) motherboards have different layouts for IDE cables, certain features such as dual bios's ect, just have a nosey round and research before you buy!

[Mikeyzig]

Re: Advice

Is a socket 478

[lcplsickoll]

Re: Advice

Asus, MSI, and DFI are all quality brands. Find something in those lines with your socket and you'll be good to go.

[Shamus]

Re: Advice

Ok, I have found out that my Dell Pc is probably a non standard m/b and power supply etc.

I am planning to buy a new m/b and case and psu and then build my own system using the parts I already have.

Any advice on what kind of m/b , case and psu I should get.

Thanks.

You have good motherboard advice above.

As for an ATX type PC case, get one with an intake fan (for the front of the case) or at least a place for an intake fan. Likewise, you will want to ensure you have an exhaust fan or mount for the rear exhaust. I prefer a roomy case that I can work in but the rest is a matter of preference.

For your PSU, ensure that you get one with at least 24 amps on the +12 volt power rail; that is very important. Stick with name brands like Enermax, Antec or even Fortron. Know before you buy the PSU how many pins your new motherboard main power header has - it will be either 20 pin or 24 pin. Once you know that, you can get the appropriate ATX PSU. A final factor to consider when buying a PSU is the legnth of the power leads. Sometimes, if your case is tall, your power wires won't be quite long enough to reach what you want it to. Name brand makers don't ususally cheat you on the legnth.