DDR3 Voltage vs HM Monitor!

[PCKiller]

Guys, i have a doubt, i have DDR3 at my work computer, at HM Monitor is working like this:

Bios: AUTO
HM Monitor Voltage: 1.72v
CPUz: 1.5v

are they working at 1.5 or 1.72?
http://www.kingston.com/hyperx/products/khx_ddr3.asp


os: windows 7 64bits.

[CptainCrunch]

Re: DDR3 Voltage vs HM Monitor!

Those are not the same thing. I googled the VIN status and those are north and south bridge readings, not RAM.

Crunch

[PCKiller]

Re: DDR3 Voltage vs HM Monitor!

Those are not the same thing. I googled the VIN status and those are north and south bridge readings, not RAM.

Crunch

oh, thanks, i was thinking about it too!

[=98=]

Re: DDR3 Voltage vs HM Monitor!

If in doubt, check the BIOS. On an X58 or above platform, RAM should never exceed 1.65v as overvolting has a directly detrimental affect on the memory controller. 99% of kits will run on 1.65v, so if in doubt, key this in directly to the BIOS.

[PCKiller]

Re: DDR3 Voltage vs HM Monitor!

in bios= AUTO and norminal voltage of this ram is 1.50

its other work computer! ok!

[=98=]

Re: DDR3 Voltage vs HM Monitor!

in bios= AUTO and norminal voltage of this ram is 1.50

its other work computer! ok!

Yes, usually a BIOs will read the JEDEC or EPP profiles and as such auto set voltage. However, there have been many cases when it doesn't read it right and sets it the voltage too low or incorrect timings.

[PCKiller]

Re: DDR3 Voltage vs HM Monitor!

98, man, if you can help me about my power of computer. I am calculating the power like this:
look i use a Corsair TX750w v2 and i cant buy other now!

1x HD: 20w
i7 950: 130w
DDR3: 10w
2x FAN120 led: 8w
Asus MB x58: 40w
Mouse/keyb.: 10w

TOTAL max. power: 218W + GTX580 SLI.
532w to 2x GTX580, i belive i can use all 750w, this source (Corsair) supports 850w with 80%.
only to play, no Benchmarks or overclock.

what do you tell me?

[=98=]

Re: DDR3 Voltage vs HM Monitor!

98, man, if you can help me about my power of computer. I am calculating the power like this:
look i use a Corsair TX750w v2 and i cant buy other now!

1x HD: 20w
i7 950: 130w
DDR3: 10w
2x FAN120 led: 8w
Asus MB x58: 40w
Mouse/keyb.: 10w

TOTAL max. power: 218W + GTX580 SLI.
532w to 2x GTX580, i belive i can use all 750w, this source (Corsair) supports 850w with 80%.
only to play, no Benchmarks or overclock.

what do you tell me?

See here:

http://www.overclock.net/power-supplies/1045231-phaedrus-quickndirty-psu-calculator.html

He's still programming his application, but the post will give you an insight into calculations.

[PCKiller]

Re: DDR3 Voltage vs HM Monitor!

hum, by this site i can use it! (stock).

never futuremark and overclock!