My graphics card, it is dying>!>!,.1,.mdngnfg

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • =98=
    Member
    • Oct 2006
    • 10299

    #1

    My graphics card, it is dying>!>!,.1,.mdngnfg

    Well, my PC has been working fine for a few weeks. I was playing PR and I started to get:

    "Display driver atikmdag stopped responding and has successfully recovered."

    I thought nothing of it, but dialed back my rather small overclock to stock. Started playing DiRT today and had a lot more of these crashes. Some lead to my game crashing as well.

    I did a full re-install of Catalyst 9.3 and even did a DriverSweep in safe mode to make sure it was fresh. Yet, it continues to crash at stock frequencies. It just happens when gaming.

    What's going on ?!?!?!
  • Namakan
    Senior Member
    • May 2007
    • 2893

    #2
    Re: My graphics card, it is dying>!>!,.1,.mdngnfg

    I thought you were the expert on this FFFFFFFFFFFFUUUUUUUUUUUUUU- (ohno)

    Comment

    • Busby, Paul (Bicci)

      #3
      Re: My graphics card, it is dying>!>!,.1,.mdngnfg

      I seem to remember a while ago you changed something to do with the chips voltages, lowering during idle ro something? or did i get the wrong end of the stick?

      If everything is set back to stock then it sounds like RMA time

      Comment

      • =98=
        Member
        • Oct 2006
        • 10299

        #4
        Re: My graphics card, it is dying>!>!,.1,.mdngnfg

        Yea, I set it all back to normal. Normal BIOS, normal speeds, normal voltages.

        I played Team Fortress 2 and it just kept freezing every minute for about a second. I can't play PR anymore, it just crashes (unrelated methinks) and DiRt obviously causes a driver crash.

        I hope I don't need an RMA, because according to Powercolor's website, the UK doesn't exist

        Comment

        • jesus
          Member
          • May 2007
          • 2413

          #5
          Re: My graphics card, it is dying>!>!,.1,.mdngnfg

          I used to get this when I overclocked my 9600GT too high.

          Comment

          • AlecJ32
            Site Staff
            • Aug 2008
            • 502

            #6
            Re: My graphics card, it is dying>!>!,.1,.mdngnfg

            The first thing to check would be the temps, which I should hope you've already done. Following that, you could make sure your power supply is supplying the correct voltages and doesn't have too much ripple, to be thorough, but beyond that there's not much left to check.

            Comment

            • =98=
              Member
              • Oct 2006
              • 10299

              #7
              Re: My graphics card, it is dying>!>!,.1,.mdngnfg

              Well, GPU core temp doesn't exceed 38c at load and memory about 60c.

              I assume my PSU is providing the correct voltage, although i'm not sure how to check really without a multimeter and I don't have one.

              Comment

              • signa
                CS-Nation / TGN Staff
                • Dec 2004
                • 4191

                #8
                Re: My graphics card, it is dying>!>!,.1,.mdngnfg

                Originally posted by Alex98uk
                "Display driver atikmdag stopped responding and has successfully recovered."...
                that sounds familiar. a friend of mine had a problem with corrupt x64 drivers on vista and I think that was the same similar error.
                "Crunch's First Officer"
                twitter: @signaprime

                Comment

                • Busby, Paul (Bicci)

                  #9
                  Re: My graphics card, it is dying>!>!,.1,.mdngnfg

                  Originally posted by Alex98uk
                  Well, GPU core temp doesn't exceed 38c at load and memory about 60c.

                  I assume my PSU is providing the correct voltage, although i'm not sure how to check really without a multimeter and I don't have one.
                  Does everest report GPU voltages maybe?

                  How about testing the card in a friends PC?

                  Comment

                  • =98=
                    Member
                    • Oct 2006
                    • 10299

                    #10
                    Re: My graphics card, it is dying>!>!,.1,.mdngnfg

                    Originally posted by [USAC]N|Pvt.B1scu1T[FM]
                    Does everest report GPU voltages maybe?

                    How about testing the card in a friends PC?
                    It reports VRM voltages, i'll have a look at that later.

                    As for testing, it's rather hard as it means taking apart my entire loop and re-fitting the air cooler :|:

                    Comment

                    • Dan2k3k4
                      Member
                      • Oct 2003
                      • 1283

                      #11
                      Re: My graphics card, it is dying>!>!,.1,.mdngnfg

                      I get this on my other Vista PC which has some ATi card... on this PC (also uses Vista) which has an nVidia card, I used to get the same error but obviously with the nvidia's equivalent of the driver: nvlddmkm

                      I just googled for a fix and found this:
                      This website is for sale! repairyourpcnow.com is your first and best source for all of the information you’re looking for. From general topics to more of what you would expect to find here, repairyourpcnow.com has it all. We hope you find what you are searching for!


                      Seems like it's something to do with Vista and not the card...

                      Comment

                      • AlecJ32
                        Site Staff
                        • Aug 2008
                        • 502

                        #12
                        Re: My graphics card, it is dying>!>!,.1,.mdngnfg

                        Originally posted by [USAC]N|Pvt.B1scu1T[FM]
                        Does everest report GPU voltages maybe?

                        How about testing the card in a friends PC?
                        I've found that software voltage monitoring programs aren't very useful. Last time I tried one, it said my 12v rail was supplying 1.4 volts of power.

                        Comment

                        • Busby, Paul (Bicci)

                          #13
                          Re: My graphics card, it is dying>!>!,.1,.mdngnfg

                          yeah speedfan does that to me but everest tends to be very similar to the bios rating which is about as accurate as your gunna get without a mulitmeter.

                          Comment

                          • megawhompertoo
                            oldswab
                            • Dec 2005
                            • 2124

                            #14
                            Re: My graphics card, it is dying>!>!,.1,.mdngnfg

                            reinstalling MS directx v. 10.x would be about the last possible software fix before a windoze reinstall (and if a driver reinstall and directx reinstall don't fix it, reinstalling windoze probably won't, either, unless you've suddenly developed a driver conflict...which is a lot like accidentally getting pregnant).

                            besides a borked card, the only other quick-fix hardware solution would be to check the contacts between some of the other bits (vrms/memory) and the heatsinks.

                            good luck

                            Comment

                            • Flt. Sgt. Powderhound
                              Member
                              • May 2007
                              • 962

                              #15
                              Re: My graphics card, it is dying>!>!,.1,.mdngnfg

                              Originally posted by megawhompertoo
                              reinstalling MS directx v. 10.x would be about the last possible software fix before a windoze reinstall (and if a driver reinstall and directx reinstall don't fix it, reinstalling windoze probably won't, either, unless you've suddenly developed a driver conflict...which is a lot like accidentally getting pregnant).

                              besides a borked card, the only other quick-fix hardware solution would be to check the contacts between some of the other bits (vrms/memory) and the heatsinks.

                              good luck

                              You say this, but I had a driver failure that was only fixed with a reformat.

                              Comment

                              Working...