bios doesnt realise ram+

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • _S3rH3nD_
    Member
    • Jul 2007
    • 187

    #1

    bios doesnt realise ram+

    hi guys,
    today i bought one 1 gig veritech 400 mhz ddr ram..my motherboard has 3 ram slots..two were occupied by 2x512mb pc400 ddr-ram wise 8c(64x8)
    i tried placing the 1 gig to third slot but comp showed me that it was a mistake with some noise..so i took one of those 512s out and placed the other one.
    result: it still says its 1 gig ram

    i took them both out and put 1 gig ram
    result: its still 1 gig ram and 266 mhz(it had to be 400 mhz)

    so my questions:
    1) what mhz are my 2x512 ones?i really cant recognise it..
    2) can i use them all 3 without an error?
    3) how can i make bios recognise it?
    4) how can i set it to 400 mhz if i go for 1 ram only?


    thanks..
  • Trevortt

    #2
    3) how can i make bios recognise it?
    Goto the manufacturers website for your motherboard and download the latest BIOS Update.

    Comment

    • Vash2051

      #3
      Mixing and matching RAM is never a good idea. Unless your sure its the same model and size.

      Comment

      • TheHeartSmasher
        The Architect
        • Dec 2006
        • 696

        #4
        Yep you will want to trash the two 512 sticks or sell them and pick up another 1 or 2 GB VeriTech stick(s) that are exactly the same.

        Comment

        • Kradath
          Member
          • May 2006
          • 1370

          #5
          You should look into your manual. There should be a table telling you what kind of ram-combinations you're able to use with your motherboard.

          Comment

          • Flt. Sgt. Powderhound
            Member
            • May 2007
            • 962

            #6
            Three RAM slots is a rather odd combination...

            Comment

            • Trevortt

              #7
              Originally posted by Flt. Sgt. Powderhound View Post
              Three RAM slots is a rather odd combination...
              Alot of older boards or cheaper boards have them.

              Comment

              • _S3rH3nD_
                Member
                • Jul 2007
                • 187

                #8
                ok i have fixed it..at least its now 1.5 gb ram..
                the thing is that third ram slot is not reading anything..
                when i check it from everest it shows 3 banks but 2 modular slots..
                what the heck?
                how to enable a third ram slot?

                Comment

                • Trevortt

                  #9
                  Like i advised above, make sure you have the latest BIOS for your motherboard.

                  Comment

                  • Hellsent 2.0
                    Member
                    • Jul 2007
                    • 2137

                    #10
                    yeh get the latest revision from your Mobo manufacturers website and put it on a pen drive..then when you boot up plug it in and go into bios and flash to the latest bios....I think...ive never done it...but i think thats how you do it..If someone else can confirm that you should try it

                    Comment

                    Working...