CCC help

[Hellsent 2.0]

OK ive been experiencing some weird texture glitches in many different game(trackmania nations, COD4, Bf2) and i think its to do with with my CCC...

here is a picure of my CCC info:


And here is the worrying thing..On the overdrive bit it says my GPU clock is at 300Mhz...



Any help?

[=98=]

Have you attempted to overclock it?

[Hellsent 2.0]

yes minorly...Then reset back to original clocks then again minorly overclock..by a few Mhz..not much

[=98=]

Make sure you haven't accidentally underclocked it.

[Hellsent 2.0]

How would i go about doing that?

[=98=]

Well make sure that any sliders that allow you to change the core and memory frequencies are at what they should be and not running at 300mhz like you said they were.

[Hellsent 2.0]

Ok i clicked on defualts so its set it all back to default settings and its just changed the GPU clock and memory clock in the middle..It still says the current clock setting is 300Mhz

[=98=]

Could be a faulty reading. Try getting some other programs.

Download GPU-Z and see what it says.

[Hellsent 2.0]

yeh i think its a faulty reading....



but what could be causing my texture problems in so many games?

[Scinto]

use GPU-Z to see the true readings, mine says its 300mhz aswell for the GPU clock but its not.

[Hellsent 2.0]

2 minutes late Scinto..tut tut...anywho Yeh ive reset them back to defaults and checked in Gpu-z and the clocks are fine..Now what could be the source of my texture problems..

Tehy are hard to describe..whilst playing cod4 if im going up some stairs perhaps the banister will elongate and mess up..at a certain angle..In trackmania nations i joined a server earlier this morning and there was like a black box by all the cars when i joined..After the track had finished and the next laoded they were gone...

I will take SS later...Just need some opinions on what it could be...Thx

[Vash2051]

Also I'm not sure if your card does but some underclock when your in desktop 2-D then crank it back up when in 3-D. It could have been getting stuck in transition.

[Hellsent 2.0]

Sorry i took my time..here a just a couple of stuff that happens..regularly..





Also i installed 8.3 drivers the other day..and halfway thorugh installing them it said i already had them..and gave an error...this also happened when installing 8.2..do i need to totally clean out my drivers and starts with 8.3? If i do what program do you recommend i get to clean me drivers?

[Scinto]

them be artifacts caused by overheating or drivers

[Hellsent 2.0]

I need to get a program to clean me drivers then..any ideas anyone?