Re: New Rig..
Intel TAT (Thermal Analysis Tool) hasthe best monitoring because it's made by INtel - but is Core 2 only
New Rig..
Collapse
X
-
Guest replied -
Re: New Rig..
agreed. the price step to an ultra is too much for the exact same specs (except for core and mem speed).
I went with a BFG factory overclocked gtx who's core is actually clocked faster than some standard ultras:
There was just an article in June's MaximumPC about the problems getting an accurate temp reading on a 'Core 2' chip. I think they said the bios has the closest reading to the actual temp.Leave a comment:
-
Guest repliedRe: New Rig..
Well then your room must be that temp, as air cooling will NOT go below ambient by more than .5°. You've also got speedstep on, as there is NO other way.
My 3 GHz AMD (WITHOUT Cool 'n Quiet) 3700 loads at about 45° and is running at 33° with 10% load and the fans at 10% (at 100% i would loose a degree). This is on a Zalman Reserator water cooler (and this performs about the same as the leading air cooler)Leave a comment:
-
Re: New Rig..
No, definitely do not get the ultra. Get a normal gtx and oc to instead.Originally posted by AFEDSLAYERTyvm for the tips..ill see what i can do =P. would it be worth going for a 8800 ultra instead of the gt? ive heard its 20% faster.Leave a comment:
-
Guest repliedRe: New Rig..
Tyvm for the tips..ill see what i can do =P. would it be worth going for a 8800 ultra instead of the gt? ive heard its 20% faster.Leave a comment:
-
-
Leave a comment:
-
Guest repliedRe: New Rig..
you DONT get it down to 15° unless your room is 15
go for aftermarket cooling, running cooler will make last longer, be quieter and you can overclock more.Leave a comment:
-
Guest repliedRe: New Rig..
I have an e6300, and just got a new case, cooler master centurion 5, it has a 120mm fan in the back and an 80 mm in the front, and my cpu is still around 45 C as it was before. I don't understand how you get yours down to 15-20. I've also bought artic silver thermal paste and that brought it down a little.Originally posted by Scintoif you get a case with v.good airflow & cooling (Antec 900, Thermaltake Armour) the CPU will stick to around 15-20*C at stock speedsLeave a comment:
-
Re: New Rig..
what.. he asked for help we gave ideas :p im sure he would want value for moneyLeave a comment:
-
Re: New Rig..
I already have the case. Antec P180b.
think we hi-jacked this thread enough? sorry OP.Leave a comment:
-
Re: New Rig..
if you get a case with v.good airflow & cooling (Antec 900, Thermaltake Armour) the CPU will stick to around 15-20*C at stock speedsLeave a comment:
-
Re: New Rig..
oops I typo'd. I did get 2x2gig mushkin. :pwould be easier to get 2x2gb ram sticks so you dont fill all your ram slots and waste money in the future having to buy 2x2gbs.
you dont really need a 3rd party cooler with the E6600 stock does a pretty decent job,
oh and dont forget the PSU
Corsair 520w/620w will be fine
forgot to put in the psu too. :p
Ill have to look up temps for the stock hsf, but i usually go with aftermarket hsf's.Leave a comment:
-
Re: New Rig..
would be easier to get 2x2gb ram sticks so you dont fill all your ram slots and waste money in the future having to buy 2x2gbs.
you dont really need a 3rd party cooler with the E6600 stock does a pretty decent job,
oh and dont forget the PSU
Corsair 520w/620w will be fine
Leave a comment:
-
Re: New Rig..
I would hope 2-3K would last more than 1 year. :shock:
for about 2k you could build a pretty good gaming machine:
cpu: e6600
mobo: evga 680i
ram: 4gig muskin 2x2g
vid: BFG 8800gtx OC
hsf: thermaltake V1
hdd: 2x raptorX in raid 0
snd: X-fi
case: P180b
Psu: Antec neoHE 550
opt: dvd-rw drive
of course that doesnt include an OS. you would need vista or XP x64 to take advantage of the full 4 gig ram.
^ thats pretty much what im building this weekend, minus the 2nd raptor. If you wanted to spend a little more you could get a quad 6600 and a nicer case like a CM Stacker. those components should last you at least a year. :)
as soon as I get some time, ill post my new build.Leave a comment:

Leave a comment: