Consider this if you are cleaning the inside of your case

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Bloodsport

    #1

    Consider this if you are cleaning the inside of your case

    Had a good old cleaning session yesterday with my compressed air thingy. Anyways I start to play BF2 today and after about 15 mins my fps dropped from it's usual 100 and odd to about 10. Strange I thought so I rebooted.

    Started the game up again only to be confronted by the same problem. Now performance loss normally indicates that either your temperatures have gone up or there is something running in the background.

    So I check the temperature. OMG. GPU 1 was at 109 degrees C. Not good. GPU 2 at a healthy 50.

    So I instantly hit the off button to save any potential damage and go to inspect. I remove the side of my case and I'm confronted by a heatwave followed by the sight of my Zalman cooler power lead hanging and not plugged into anything. Put it back in, started BF2 again and all was back to normal.

    Both cards seem fine so it looks like I've been lucky, but if you are fiddleing around inside your case, double check all connections as you might end up with an unattractive bill for replacement parts.
  • =98=
    Member
    • Oct 2006
    • 10299

    #2
    Re: Consider this if you are cleaning the inside of your case

    Ha :laugh: :laugh:

    Comment

    • Scinto
      Retired TGN *****
      • Mar 2006
      • 5387

      #3
      Re: Consider this if you are cleaning the inside of your case

      aww no melting

      Comment

      • Minicoop503

        #4
        Re: Consider this if you are cleaning the inside of your case

        i like to wash out my case with a nice bucket of water and a sponge. It works nice, the dust just washes away, along with your mobo, cpu, etc..

        Comment

        • camper.
          Member
          • Dec 2006
          • 3459

          #5
          Re: Consider this if you are cleaning the inside of your case

          Originally posted by minicoop503
          i like to wash out my case with a nice bucket of water and a sponge. It works nice, the dust just washes away, along with your mobo, cpu, etc..
          Actually, it would be fine if you removed the BIOS FWH chip, and the CMOS battery and left everything to fully dry for 2 weeks in front of a hot air fan.

          Comment

          • Sir. S.A.S

            #6
            Re: Consider this if you are cleaning the inside of your case

            lol my mobo shuts down when a fan fails .

            I also have fan filters on the intake fans which are cleaned out every 2 weeks.

            Comment

            • Bloodsport

              #7
              Re: Consider this if you are cleaning the inside of your case

              Originally posted by Sir. S.A.S
              lol my mobo shuts down when a fan fails .

              I also have fan filters on the intake fans which are cleaned out every 2 weeks.
              Same here with the filters. But I have two 120mm fans on the front of my case which suck in a lot of crap!

              As for the mobo, I'm sure mine would do it, but with the Zalman plugged into my mainboard (in one of the fan sockets) is there anyway round this?

              Mobo is A8N-32SLI btw.

              Comment

              • litefire
                Member
                • Oct 2007
                • 293

                #8
                Re: Consider this if you are cleaning the inside of your case

                Originally posted by Scinto
                aww no melting
                haha yea
                dude that sucks lol good thing u checked

                Comment

                • TheEn|gma
                  Member
                  • Jun 2005
                  • 5247

                  #9
                  Re: Consider this if you are cleaning the inside of your case

                  I had a similar experience:

                  I was installing my new SATA HDD all went fine, took the old IDE out disconnecting correctly. Hooked up the SATA with a 4 pin Molex and connected the rest of the 4pins together.

                  I booted into BIOS, and thought HOLY! My old HDD must have been loud.... I then walked into my brothers room because I was using his PC to get some drivers or something. I came back after about 30seconds to see my entire PC shut down.

                  Turns out not a single fan was working. My CPU fan was not on neither was three system fans, needless to say I thanked my lucky stars that the thing didn't melt.

                  Comment

                  Working...