Specs
AMD X2 4400+
Corsair 2x1gbs DDR500
eVGA 7800gt
Antec SP500 2.0 500w
Was thinking of this
My current mobo, Asus A8N32 is nothing but problems. I cant run that memory past 200mhz (which is DDR400) and its DDR500! My last set of memory, which is real DDR400 couldn't even run at 200mhz!
I tried running it past 200 and my computer would boot into windows and crash to a restart.
Second problem, I would Start>Turn of computer>Restart...and the comp would sit power running but nothing happening when it should of been starting back after reboot.
I would have to manually power off then power on again to boot up properly. So when I needed to restart for any reason I would have to Start>Turn of computer>Shutoff then power on manually.
This also would happen when I would edit the bios and had to restart from the bios. So annoying!
AMD X2 4400+
Corsair 2x1gbs DDR500
eVGA 7800gt
Antec SP500 2.0 500w
Was thinking of this
My current mobo, Asus A8N32 is nothing but problems. I cant run that memory past 200mhz (which is DDR400) and its DDR500! My last set of memory, which is real DDR400 couldn't even run at 200mhz!
I tried running it past 200 and my computer would boot into windows and crash to a restart.
Second problem, I would Start>Turn of computer>Restart...and the comp would sit power running but nothing happening when it should of been starting back after reboot.
I would have to manually power off then power on again to boot up properly. So when I needed to restart for any reason I would have to Start>Turn of computer>Shutoff then power on manually.
This also would happen when I would edit the bios and had to restart from the bios. So annoying!
Comment