Artifacting.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • pix

    #1

    Artifacting.

    I no this has been coverd lots of times but mine seems to be differnt. I had this problem really bad and tryed all drivers and could not sort. Did a full system restore and used old drivers that came on the bf2 disc with 1.3 patch and ran sweet as a nut. Just installed 1.4 with old drivers again and it just reboots my system half way through a game saying there is a problem with my drivers for my card. If i use any other drivers after 1 game it is not playable with image splintering. I have cleaned every thing with air all fans are working fine. cant be a heat issue as was playing fine before and have used driver cleaner when trying differnt drivers. Would the psu affect this as it is only a 250w. PLEASE HELP

    Specs
    pentium 4 2.66ghz
    1gb ram
    6600 256mb agp
    80gb hd
  • Lamri35UK

    #2
    Re: Artifacting.

    To be honest mate that PSU does seem a bit small IMO.
    Also, how old is your HD ? It may be possible that you are dropping a few sectors and that is what could be causing the problem.
    If you are in the UK may I suggest a surf to http://www.novatech.co.uk
    They seem good value, i've used them in the past with no problems :)

    Comment

    • pix

      #3
      Re: Artifacting.

      Yes mate i am in the uk. The hd is about 4 years old.

      if i go into my card it says it is a agp x4 when a mates is agpx8 can i change this and what does it do.

      Comment

      • squizz

        #4
        Re: Artifacting.

        generic 250w for a 6600? that seems really off I would usually crash a geforce 5200 pci on a psu around that size

        Comment

        • pix

          #5
          Re: Artifacting.

          nice mate cheers you have made my mind up time for a new psu cheers bud.:)

          Have just got a nice 500w psu will let you no if it works.

          Comment

          Working...