Ram Problem

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • imported_nismojspec

    #1

    Ram Problem

    i just bought a 1gb DDR of RAM. I put it in but it doesnt. any suggestions?
  • Neat_Hedgehog

    #2
    Re: Ram Problem

    Does the system post (the little beep noise) at all, or do you just get a blank screen? Are you replacing your current kit, or are you adding on?

    If you're replacing your current kit, try clearing your CMOS after installing the new stuff. I've had to do that frequently to get new RAM to work.

    Comment

    • imported_nismojspec

      #3
      Re: Ram Problem

      no beeps comp starts up fine, work fine , and its an add on,it just shows that i still have 512mb, wen i should have 1.512gb

      Comment

      • r.satterwhite

        #4
        Re: Ram Problem

        try the new ram by itself in slot 0. what does dxdiag say?

        Comment

        • Heavy552 AWG

          #5
          Re: Ram Problem

          Did you mix ram types? Like one for 333 DDR (PC2700?) and one for PC3200?

          What operating system are you using?

          What motherboard are you using?

          Comment

          • knghtwhosaysni

            #6
            Re: Ram Problem

            What motherboard and RAM sticks do you have?

            Comment

            • ConscriptVirus
              Member
              • Oct 2007
              • 6369

              #7
              Re: Ram Problem

              it should be the right "Type" because if it fits into the motherboard, then its the right type (different ram has different thingys to plug into its own type of ram thingys in the motherboard) so its impossible tp plug in a rambus ram into a motherboard that takes some other kind

              Comment

              • imported_nismojspec

                #8
                Re: Ram Problem

                it fits trust me, its doa u could close this thread.

                Comment

                • ConscriptVirus
                  Member
                  • Oct 2007
                  • 6369

                  #9
                  Re: Ram Problem

                  is it possible that one of ur slots is faulty or if the memory is broken...i cant think of anything else

                  Comment

                  • ebag

                    #10
                    Re: Ram Problem

                    if you did not mix up ram types then get a refund

                    Comment

                    • Minicoop503

                      #11
                      Re: Ram Problem

                      It is doa. I helped him pick it out and it should work perfectly with his mobo. It is pc3200 which his other ram is at. I also told him about trying the ram by itself but no use . I guess we shoulda listened to the reviews

                      Comment

                      • imported_nismojspec

                        #12
                        Re: Ram Problem

                        yo so wat you guys reccommend??? i want one were it has good reviews.....something thatll definetly work........this is wat i need: 85-90bucks cost of ddr ram,184pinn, pc3200, any suggestions?anything will be greatly appreciated i like newegg so if ur gonna link me send it from there.

                        Comment

                        • knghtwhosaysni

                          #13
                          Re: Ram Problem

                          It could be very possible that the memory is just not compatible with your motherboard, but I cannot determine if that's the case because you still have yet to give us the motherboard model number. I would recommend you tell us the motherboard model number and the memory model number.

                          Comment

                          • Merlin
                            Member
                            • Apr 2007
                            • 861

                            #14
                            Re: Ram Problem

                            Originally posted by nismojspec
                            i just bought a 1gb DDR of RAM. I put it in but it doesnt. any suggestions?

                            Is it a single 1Gb stick or 2x512Mb sticks?

                            However many you have stick of ram you have. Test each one by one, plugging each individual stick into your mobo one at a time and try to boot. This will show if any are defective.

                            Comment

                            • imported_nismojspec

                              #15
                              Re: Ram Problem

                              no slots defective i have 2x256mb, the one with the problem is a single stick, my motherboard is BIOSTAR M7NCD PRO

                              Comment

                              Working...