Bootable CD using a MAC

[K8T]

I've got a job to restore 9 MAC's to there bare bones and I have restore CD's but I've never used a MAC before.... Whats the command to choose the booting devices? Like you know how you press F12 or F2 or whatever for Windows machines... and it brings up a list of things...

Boot From CD
Boot From HDD
Boot From Floppy
etc....

Plz help me out i need a response ASAP.

[Scinto]

Re: Bootable CD using a MAC

mac os x boot up keys

Command-S Boot into Single User Mode
Command-V Boot using "Verbose" mode (shows all kernel and startup console messages)
X Reset startup disk selection and boot into Mac OS X Server
Shift Boot into "Safe Boot" mode, which runs Disk First Aid. A reboot will be required afterward.
Option Boot into Open Firmware to select a boot device
Command-Option-Shift-Delete Bypass internal harddrive on boot
T Boot into Firewire target disk mode
C Boot from the internal optical drive
N Start from the Network (NetBoot)
Command-Option-P-R Reset Parameter RAM (PRAM) and non-volatile RAM (NVRAM)
(mouse button) Eject (internal) removable media

ALSO: if you use open firmware password... you'll need this:
Startup Manager -accessed by pressing the Option key during startup
Enter commands after starting up in Open Firmware -press Command-Option-O-F key combination during startup.

http://docs.info.apple.com/article.html?artnum=106482

How to troubleshoot a computer with Open Firmware Password enabled
If you cannot access the Open Firmware Password application and need to troubleshoot your computer by:

Resetting the PRAM
Starting up in Single-user mode
Starting up in Verbose mode
Starting from CD-ROM

Then follow these steps:

Start up into Open Firmware by pressing and holding the Command-Option-O-F key combination during startup.
At the Open Firmware prompt, type: reset-nvram
Press Return.
When prompted for your password, enter it and press the Return key. It responds OK.
At the Open Firmware prompt, type: reset-all
Press Return.

The computer restarts and you are now be able to reset the PRAM and startup in Single-user mode, Verbose mode, or from CD-ROM.

i think maybe its just the 1st part for the keys,
(google is your freind)